TD Navio Device: How to set up Private Auditory feedback

septiembre 05, 2024

For Selection methods that allow Auditory feedback, Private feedback can be used in the TD Navio Device. Important! You must have your wired headphones plugged into the device in order for the relevant options to appear in the menus. Plug your headphones in before you start the setup procedure.

To set it up for Auditory Touch:

  1. Go into edit mode.
     
  2. Under User → User, select Speech output device
    Turn off Use default device and select Speakers.

     
  3. Under User → Access Method, select Audio feedback
    Turn off Use default device and select Headphones.

     
  4. Exit edit mode.
To set up for Auditory Scanning:
  1. Go into edit mode.
  2. Under User → User, select Speech output device
  3. Turn off Use default device and select Speakers.
  4. Under User → Access Method, select Scanning
  5. Audio Feedback → On →Turn off Use default device and select Headphones.
  6. Exit edit mode.
Note: Private audio feedback only works with the wired headphones. Unfortunately, it is currently not possible to support private audio feedback with Bluetooth headphones, due to iOS technical limitations.