How do I add an unprogrammed remote in Virtual Remote?
abril 03, 2019
Select the plus button from the menu.
Select the Unprogrammed button.
Select the type of Unprogrammed Remote template you want to add or choose Blank Template.
Select a button to program. The available icons will differ depending on what type of Remote control was selected in Step 3.
Point the remote control at your Tobii Dynavox IR receiver and press the desired button on the remote control that you want Virtual Remote to learn. Note: When the signal is saved in Virtual Remote the Done popup will show. The popup will close down automatically after a few seconds.
Repeat step 4 and 5 until you have programmed all the necessary buttons on the remote. Note: To change or delete buttons on the remote control you need to finish programming and go to Edit mode.